SECURITY FASTENER SERIES: ONE WAY SEX BOLTS

ONE WAY SEX BOLTS

FEMALE NUT

A±0.008	H±0.011	D±0.004	L±0.01	G±0.02	THREAD
0.4375	0.12	0.245	0.625	0.5	10-24
0.4375	0.12	0.245	0.5	0.37	10-24

(IN INCH)

MALE SCREW

TYPE	A ±0.008	H ±0.01	D1 ±0.004	D2 ±0.004	L ±0.01	L1 ±0.008	L2 ±0.02	L3 ±0.02	THREAD
B	0.437	0.12	0.25	-	0.5	0.13	0.37	-	10-24
B	0.437	0.12	0.25	-	0.75	0.27	0.48	-	10-24
B	0.437	0.12	0.25	-	0.937	0.27	0.667	-	10-24
A	0.437	0.12	0.25	0.185	1.06	0.27	0.22	0.57	10-24
A	0.437	0.12	0.25	0.185	1.19	0.27	0.22	0.70	10-24
A	0.437	0.12	0.25	0.185	1.31	0.27	0.22	0.821	10-24

 (IN INCH)

MATERIAL AVAILABLE FOR ONE WAY SEX BOLTS: 
STEEL, STAINLESS STEEL , ALUMINUM, BRASS

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

SELF TAPPING THREADED INSERT MANUAL INSTALLATION TOOLS

SELF TAPPING THREADED INSERT MANUAL INSTALLATION TOOLS

1. HOLE SIZE:

RECOMMENDED HOLE SIZE IS INDICATED ON EACH DATA SHEET AND IS INTENDED TO BE FOR REFERENCE ONLY. HOLE SIZE MAY NEED TO BE INCREASED OR DECREASED DEPENDING ON BASE MATERIAL, INSTALLATION TORQUE OR PERFORMANCE REQUIRED. OPTIMUM HOLE SIZE SHOULD BE DETERMINED BY REQUESTING SAMPLES & INSTALLING THEM IN THE INTENDED MATERIAL.

2. HOLE DEPTH:

IN THRU HOLE APPLICATIONS THE INSERT LENGTH SHOULD NOT EXCEED THE MATERIAL THICKNESS. IN BLIND HOLE APPLICATIONS THE HOLE DEPTH SHOULD BE 1.2XINSERT LENGTH AND THIS VALUE IS INDICATED ON MOST DATA SHEETS.

3. COUNTERSINK

A 60°COUNTERSINK IS REQUIRED FOR MOST MATERIALS TO INSURE A FLUSH SURFACE AFTER INSTALLATION.

4. WALL THICKNESS

WALL THICKNESS SHOULD BE 0.35 TO 0.5 X HOLE DIAMETER DEPENDING ON BASE MATERIAL.

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

　

INCH SIZE		METER SIZE		LENGTH	SQUARE ACROSS FLAT	COLLAR ACROSS FLAT
THREAD	PART NO.	THREAD	PART NO.	I1
2-56	TSIT0256	M2.5	TSMT025	2.165	0.197"	7mm
4-40	TSIT0440	M3	TSMT030	2.165	0.197"	7mm
6-32	TSIT0632	M3.5	TSMT035	2.362	0.197"	7mm
8-32	TSIT0832	M4	TSMT040	2.362	0.197"	7mm
10-24**	TSIT1024	M5	TSMT050	2.953	0.315"	13mm
1/4-20**	TSIT0420	M6	TSMT060	2.953	0.315"	13mm
5/16-18	TSIT0518	M8	TSMT080	2.953	0.315"	13mm
3/8-16	TSIT0616	M10	TSMT010	3.740	0.492"	19mm
7/16-14	TSIT71614	M12	TSMT012	3.740	0.492"	19mm
1/2-13	TSIT01213	M14	TSMT014	3.740	0.492"	19mm

STEP 1.

DRILL THE HOLE, SCREW INSERT ON TO THE TOOL WITH SLOT POINTING DOWNWARD

STEP 2.

MAINTAINING THE TOOL PERPENDICULARITY, ROTATE THE TAP CLOCKWISE & SCREW ITS WAY INTO MATERIAL

STEP 3. 

BACK OUT THE TOOL ANTI-CLOCKWISE & IT WILL AUTOMATICALLY RELEASED FROM THE INSERT