TSC 5 SELF-CLINCHING STANDOFFS

TSC 5 SELF-CLINCHING LOCK NUTS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 6 SELF-CLINCHING STUDS

TSC 6 SELF-CLINCHING STUDS

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 
STEEL, STAINLESS STEEL

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ STUDS： 
EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

FRAME SCAFFOLDING FLIP LOCK PIN

 

FRAME SCAFFOLDING FLIP LOCK PIN

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 
APPLICATION IN FRAME SCAFFOLDING

 

Roof Washer

Roof Washer

A system for diverting rainwater at the start of each rainfall away from collection tanks and cisterns, so that only the cleaner water that follows is collected for reuse.

CYLINDER SCREW

CYLINDER SCREW

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

CYLINDER NUT

CYLINDER NUT

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

turning part

Metal & Turning Part

 

Customized product
Call us on phone :+886-4-7237159
Mail:recept@topscrew.com.tw

 

SIX LOBE WITHOUT PIN SEX BOLT

SIX LOBE WITHOUT PIN SEX BOLT

MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

FEMALE NUT

MALE SCREW

contact us 
Tel:+886-4-7237159
E-mail:recept@topscrew.com.tw

Carbon Rivet Pin

Carton Rivet Pin

APPLICATION: 

Carton Rivet Pin is used in document envelope (paper and poly),box

and make box/document envelope reuseable

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

Leveling screw

Leveling Screw

adjusting screws for bringing an instrument or other object into level
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

Multi-grip Blind Rivet

MULTI-GRIP BLIND RIVET

MATERIAL AVALIABLE: 
RIVET: ALUMINUM 5052
MANDREL: STEEL 1022

SUITABLE APPLICATIONS: 
1.AUTOMOBILES, MOTORCYCLES, ELECTRCAL APPLIANCES, LIGHTING FIXTURES, ETC.
2.MAKES THE GAP OF JOINING OBJECTS EXPAND FIRST THEN RIVETS THEM CLOSELY.
3.IT WILL NOT BE LOOSENED BY SHANK.
4.THE INNER AND OUTER JOINS A GOOD LOOKING.
5.HELPS REDUCE STOCK RANGE.
6.PARTICULAR DOME HEADS ACCEPTABLES.
7.FINISH AVAILABLE IN A MULTIPLE OF COLORS.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

Patch Insert - 360°

Patch Insert - 360°

Material:Steel, Stainless Steel

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

Thin Wall:

Thick Wall:

Patch Insert - 180°

Patch Insert - 180°

Material:Steel, Stainless Steel

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

Thin Wall:

Thick Wall:

Washer Head Thread Insert

Washer Head Thread Insert

 

Material：Zinc alloy
Plating : Zinc plated surface
Advantage：

1.Inexpensive solution for reinforcing threads in soft woods

2.Inch or matric threads available

3.Type E and Type D unsert nut (flush and flanged) available

4.multiple length options

5.Durable zinc alloy construction

Suitable Application： 

1.ready to assemble furniture

2.drawer pulls

3.display cases

4.crating

5.anywhere threaded inserts are installed in soft wood

 

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

Internal Thread Insert

Internal Thread Insert

Material：Zinc alloy

Plating : Zinc plated surface

Advantage：

1.Inexpensive solution for reinforcing threads in soft woods

2.Inch or matric threads available

3.Type E and Type D unsert nut (flush and flanged) available

4.multiple length options

5.Durable zinc alloy construction

Suitable Application：

1.ready to assemble furniture

2.drawer pulls

3.display cases

4.crating

5.anywhere threaded inserts are installed in soft wood

LARGE FLANGE SPLINED RIVET NUT, CLOSED END TSBS-C

BLIND RIVET NUT-WATERPROOF

LARGE FLANGE SPLINED RIVET NUT, CLOSED END
TSBS-C SERIES

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE: 
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT: 
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: 
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METAL
GENERAL LIGHT FABRICATION

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST 
★ NOTE: K= KNURLED BODY

Large Flange Splined Rivet Nut TSBS-C

FLAT HEAD RIVET, CLOSED END BEM-C, BAI-C

BLIND RIVET NUT-WATERPROOF

FLAT HEAD RIVET, CLOSED END
BEM-C, BAI-C SERIES

 

MATERIAL AVAILABLE: 
STEEL, STAINLESS STEEL 302( INOX A2/18-8) AND 316 ( INOX A4/18-10), BRASS, ALUMINUM 5056

SURFACE FINSIH AVAILABLE: 
STEEL: CR3 WHITE/ YELLOW/ BLACK ZINC PLATED, CR3 ZINC NICKEL PLATED, NICKEL PLATED.
STAINLESS STEEL: CLEAN OR PASSIVATED.
BRASS: CLEAN
ALUMINUM: CLEAN

CHARACTERISTICS OF SMALL FLANGE BLIND RIVET NUT: 
1.THE BLIND RIVET NUT HAS BEEN SPECIALLY DEVELOPED TO GIVE DESIGNERS A STRONG AND VIBRATION- PROOF STEEL THREAD IN THIN SHEET APPLICATIONS.
2.THE BLIND RIVET NUT CAN BE USED TO ASSEMBLE TWO OR MORE SHEETS OF VARIOUS MATERIALS (STEEL, ALUMINUM, WOOD, PLASTIC, ETC.) AND CAN BE FIXED BY A SCREW.
3.THE HEAD OF SMALL FLANGE BLIND RIVET NUT IS IN A COUNTERSUNK SHAPE THAT MAKES THE APPLICATION SURFACE FLAT AND SMOOTH AFTER INSTALLATION.
4.THE BLIND RIVET NUT IS FAST AND CONVENIENT IN INSTALLATION.
5.APPLICATION SURFACE FINISH WILL NOT BE DAMAGED AFTER INSTALLTION OF BLIND RIVET NUT.

THE BLIND RIVET NUT OFFERS THE FOLLOWING ADVANTAGES: 
1.EASY AND FAST INSTALLATION.
2.HIGH TORQUE AND STRONG THREADS ARE COMPARABLE TO NORMAL FASTENERS.

ASSEMBLY APPLICATIONS: AUTOMATIVE, ELECTRICAL ENGINEERING, SHEET METAL,
GENERAL LIGHT FABRICATION

★ OTHER SIZES, MATERIAL ARE AVAILABLE UPON REQUEST 
★ NOTE: K= KNURLED BODY

Flat Head Rivet nut BEM-C, BAI-C

TS600 AIR RIVETING NUT TOOL

TS600 AIR RIVETING NUT TOOL

 

NOSE - CHOOSE THREE FROM : 
M4, M5, M6, M8, M10, M12
8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16

★ Can choose FIVE pulling nut. 

CHARACTERRISTICS OF TS600 RIVETING NUT TOOL： 
1.Large working torque
2.Semi-automatic spin-pull technology.
3.Compact, Ergonomically designed tool.
4.Stroke adjustment is quick and easy.
5.Safety; no electrical shock; no heat generated
6.Install without producing any harmful mark
7.High pull forces required to place large diameter inserts.
8.Change thread sizes or adjust stroke is done outside of the tool.
9.Under an easy pneumatic operation, a high performance can be achieved efficiently.
 

TS600 Air Riveting Nut Tool

PLUSNUT - PRE-BULBED

PLUSNUT - PRE-BULBED
( QUAD FOLDING RIVETNUTS / SPLIT NUT )

FEATURES：
1.SUPERB PULL-OUT STRENGTH, EXCEPTIONAL TORQUE.
2.WIDE GRIP RANGE.
3.FASTENS SECURELY IN UNEVEN SURFACES.
4.INSTALLS CLEANLY WITHOUT DISTORT, DEFORM OR DAMAGING PARENT MATERIAL (EX. SOFT PLASTICS, THIN SHEET METAL).
5.THE FOUR LEGS ARE PULLED TOGETHER EXPANDING OUTWARDS BEHIND THE SURFACE MATERIAL TO PROVIDE A LARGE LOAD BEARING AREA.
6.SPECIFICALLY DESIGNED FOR USE IN SOFT AND BRITTLE MATERIALS, SHEET METAL, FIBERGLASS, PLASTICS AND COMPOSITES.

APPLICATIONS：
1.AEROSPACE (E.G., INSTRUMENT PANEL, SEATBELT)
2.AUTOMOBILES AND MOTORCYCLES PARTS AND MOLDINGS (E.G., CAR TOP CARRIERS)
3.TRUCKS AND TRAILERS SANDWICH SECTIONS AND PANELLING. 4.DOMESTIC APPLIANCES – HANDLES, ADJUSTABLE FEET AND FIXING POINTS.
5.PLASTIC FABRICATIONS：ELECTRONICS, ENCLOSURES...ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

Plusnuts - Pre-bulbed