SIX LOBE WITHOUT PIN SEX BOLT

SIX LOBE WITHOUT PIN SEX BOLT

MATERIAL AVALIABLE:
STEEL, STAINLESS STEEL, ALUMINUM, BRASS

ADOPT SPECIAL HEAD TYPE AND PUNCH ON THE DESIGN IN SCREW, HAVE SAFE, GUARD TAKE APART AND THEFT, OFFER FUNCTION PROTECTED TO DESTROY TO DEFENDING. GENERAL WRENCH SET IS ALL UNABLE TO DESMANTLE SUCH AS CROSS, STRAIGHT-LINE HEX KEY, TORX KEY ETC.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

FEMALE NUT

MALE SCREW

contact us 
Tel:+886-4-7237159
E-mail:recept@topscrew.com.tw

UNDERCUT ANCHOR,EXPANSION ANCHOR

EXPANSION ANCHOR

UNDERCUT ANCHOR

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST 

FEATURES OF ANCHOR BOLT: 
1.EASY TO INSTALL
2.HIGH LOAD CAPACITIES EVEN IN THE LOW DENSITY BASE MATERIAL
3.WITHOUT THERMAL BRIDGE
4.QUICK INSTALLATION
5.DOUBLE SAFETY FEATURES
6.MATERIAL ELECTROPLATED AND GALVANIZED

ADVANCED CURTAIN WALL SYSTEM; A.C.T.
INSTALLATION:

 

ADVANTAGE & BENEFIT OF ANCHOR BOLT: 
1.INVISIBLE FROM FRONT OF FAÇADE
2.STRESS-FREE FIXING IN NATURAL STONE
3.MAXIMU POSSIBLE PULL-OUT LOEAD HIGH COLLAPSE LOADS THAN TRADITIONAL SYSTEM
4.FAST & EASY INSTALLATION OF REVEAL
5.STATIC OPTIMISED POSITION OF ANCHOR THE MAX. BENDING STRESS IS REDUCED BY 50%

 

FIELDS OF APPLICATION: 
1.CURTAIN WALL INSTALLATION
2.BUILDING CURTAIN GLASS INSTALLATION
3.MARBLE INSTALLATION
4.STRENGTHENED GLASS INSTALLATION

EXAMPLE:

 

Roof Washer

Roof Washer

A system for diverting rainwater at the start of each rainfall away from collection tanks and cisterns, so that only the cleaner water that follows is collected for reuse.

CYLINDER SCREW

CYLINDER SCREW

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

CYLINDER NUT

CYLINDER NUT

 

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

SPOKE NIPPLE

MOTORCYCLE PARTS - SPOKE NIPPLE

MATERIAL AVAILABLE: 
ALUMINUM 7075

FINISH SURFACE: 
ANODIC TREATMENT

COLORS: 
BLUE, RED, GREEN, GOLD, SILVER, BLACK

★ENHANCE THE LOOK OF YOUR WHEELS!

contact us :
Tel:+886-4-7237159
E-mail:recept@topscrew.com.tw

 

 

turning part

Metal & Turning Part

 

Customized product
Call us on phone :+886-4-7237159
Mail:recept@topscrew.com.tw

 

TSC 6 SELF-CLINCHING STUDS

TSC 6 SELF-CLINCHING STUDS

MATERIAL AVAILABLE FOR SELF-CLINCHING STUDS: 
STEEL, STAINLESS STEEL

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ STUDS： 
EXTERNALLY THREADED FASTENERS WHICH ARE USED WHERE THE ATTACHMENT MUST BE POSITIONED BEFORE BEING FASTENED.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 5 SELF-CLINCHING STANDOFFS

TSC 5 SELF-CLINCHING LOCK NUTS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 4 SELF-CLINCHING STANDOFFS

TSC 4 SELF-CLINCHING NUTS

INSTALL THE CLINCHING PART - TSC4

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL
THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

WELDING STUD

WELDING STUD

MATERIAL AVAILABLE: 
STEEL WITH COPPER PLATED, STAINLESS STEEL, BRASS

★OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

TSC 8 BLIND PRESSED NUTS

TSC 8 BLIND PRESSED NUTS

ADVANTAGES OF CLINCHING PARTS: 
1.MAY BE INSTALLED USING ANY PARALLEL ACTING SQUEEZING FORCE.
2.PROVIDE HIGH PUSHOUT AND TORQUE-OUT RESISTANCE.
3.DO NOT REQUIRE SPECIAL HOLE PREPARATION, SUCH AS CHAMFERING AND DEBURRING.
4.REVERSE SIDE OF METAL SHEET REMAINS FLUSH.
5.NO RETAPPING NECESSARY AFTER APPLICATION.
6.LOW INSTALLED COSTS.

★ NUTS： NUTS WITH THREAD STRENGTHS GREATER THAN MILD STEEL SCREWS ARE COMMONLY USED WHEREVER STRONG INTERNAL THREADS ARE NEEDED FOR COMPONENT ATTACHMENT OF FABRICATION ASSEMBLY.

★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST

 

 

SLOTTED TRUSS HEAD SEX BOLTS

SLOTTED TRUSS HEAD SEX BOLTS

MATERIAL AVALIABLE:
  STEEL, STAINLESS STEEL
★ OTHER SIZE, MATERIAL ARE AVAILABLE UPON REQUEST